Htc Dash Manuel d'utilisateur télécharger pdf (Page 134)

Hard Reset

You can also perform a hard reset (also known as a full reset). A

hard reset should be performed only if a normal reset does not

solve a system problem. After a hard reset, the device is restored

to its default settings — the way it was when you ﬁrst purchased

it and turned it on. Any programs you installed, data you entered,

and settings you customized on the device will be lost. Only

Windows Mobile software and other preinstalled programs will

remain.

To perform a hard reset:

1. Press and hold the Talk Key and End Key, and at the

same time, use the stylus to press the RESET button at

the bottom of your device.

2. Release the stylus, but continue pressing the TALK and

END buttons until you see the following message on

the screen:

This operation will delete

all your personal data,

and reset all settings to

the manufacturer default

settings. Press ENTER to

restore manufacturer

defaults, or press Camera

button to cancel.

3. Release the Talk Key and End Key, and then press the

ENTER button on your device.

Note:

Your device will be set back to factory default settings. Please

ensure any additional installed programs and user data have

been backed up before a hard reset is performed.

Clear Storage

Another way to clear the device storage and reset all settings back

to factory default settings is to use the Clear Storage feature. You

will lose all your data and ﬁles on the device storage when you use

Clear Storage, so make sure to do a backup ﬁrst.

1. Tap Start > Settings > System tab > Clear Storage.

2. Enter “1234” and then tap Yes.

128 Section 12: Managing Your Device

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 157 158

Pas de commentaire

Htc Dash Manuel d'utilisateur Page 134